news


BPR "Reference Designation" available

AutomationML e.V. is going to publish ‘Best Practice Recommendations’ to complement the AutomationML standard - IEC 62714 – and to give modelling guidelines for specific use cases.

The AutomationML standard series IEC 62714 "Engineering data exchange format for use in industrial automation systems engineering” already contains many use cases and guidelines of how system engineering information is modelled as well as which meta information could enhance the data excahnge.
In order to specify these definitons with examples, to apply them to specific use cases, and to facilitate the first steps with AutomationML, specific issues for the modelling of data in AutomationML are illustrated in Best Practise Recommendations (BPR).
In addition, the BPR shall provide a consistent realization for specific use cases and shall, thus, complement the AutomationML standard documents.
BPRs are no subject of standardization but in case of a concretization of the IEC 62714 series the content could be included in it later on - within a maintenance cycle.

Download the new BPR: Reference Designation.

Technical systems are usually modular and/or hierarchically structured enabling the breakdown of the technical solution to individual solution components. This is valid for all technical systems independent of their nature or their character as product or production system.
During the life cycle of a technical system the individual components need to be identifiable as individual object and as object type. Therefore different identification capabilities are available.
One of the most recent identification methodologies of structured objects is codified within the IEC 81346- Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations.
This best practice recommendation describes the integration of reference designations following IEC 81346-1:2009-07 within AutomationML based models of production systems.

(06.11.2017 - Johanna Pauly)

80 Participants from 14 countries at the 5th AutomationML User Conference

20.11.2018 - Johanna Pauly
AutomationML e.V., together with ABB, hosted the 5th AutomationML User Conference on October ...

» show news

Participation at SPS IPC Drives in Nuremberg

19.11.2018 - Johanna Pauly
From November 27th to 29th, 2018 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...

» show news

The AutomationML Editor 5.1.2 is available

01.11.2018 - Johanna Pauly
The AutomationML association releases the updated » show news

BPR "Units in AutomationML" available

18.10.2018 - Johanna Pauly
AutomationML e.V. publishes ‘Best Practice Recommendations’ to complement the AutomationML standard ...

» show news

New Member – SBA Research

15.10.2018 - Igor Klubkov
Oktober 1st, 2018. Magdeburg. We are happy to welcome SBA Research as a new member of the Automatio...

» show news

5th AutomationML User Conference - Last Minute Registration

26.09.2018 - Johanna Pauly
As there are few free places, you can still register for the 5th AutomationML User Conference (Octob...

» show news

New Member – Schneider Electric

17.09.2018 - Igor Klubkov
September 15th, 2018. Magdeburg. We are happy to welcome Schneider Electric as a new member of the ...

» show news

Don"t forget your Conference registration!

10.09.2018 - Johanna Pauly
The AutomationML association invites you to attend the 5th AutomationML User Conference on October 2...

» show news

New Member – AmpereSoft GmbH

22.08.2018 - Igor Klubkov
September 01st, 2018. Magdeburg. We are happy to welcome AmpereSoft GmbH as a new member of the Aut...

» show news

Program for the 5th AutomationML User Conference

07.08.2018 - Johanna Pauly
The program for the 5th AutomationML User Conference at the ABB Business Center in Gothenburg, Swede...

» show news

Application Recommendation "Provisioning for MES and ERP – Support for IEC 62264 and B2MML" available

06.07.2018 - Johanna Pauly
This application recommendation describes the integration of ISA-95 and/or B2MML into AutomationML.

» show news

AutomationML Part 1 Edition 2 at "FOCUS online"

08.06.2018 - Johanna Pauly
The German magazine "FOCUS online" reports about AutomationML, the release of the AutomationML stand...

» show news

AutomationML Standard Part 1 Edition 2 has been published

28.05.2018 - Johanna Pauly
The AutomationML IEC standard document IEC62714-1:2018 ED2 has been published. The first part of the...

» show news

5th AutomationML User Conference - Call for Speakers Extended

20.04.2018 - Johanna Pauly
The deadline for paper submissions for the 5th AutomationML User Conference is extended until 13th o...

» show news

Participation at Hannover Messe

04.04.2018 - Johanna Pauly
From April 23th to 27th, 2018 AutomationML e.V. will attend the HMI in Hanover. You can find us in h...

» show news

5th AutomationML User Conference - Registration possible now

28.03.2018 - Johanna Pauly
A registration for the 5th AutomationML User Conference is possible now. The event is held in Eng...

» show news

5th AutomationML User Conference - Call for Speakers

16.02.2018 - Johanna Pauly
We are looking forward to welcoming you at the ABB Business Center in Gothenburg, Sweden, for the 5t...

» show news

New Engine Online

15.01.2018 - Johanna Pauly
The new AutomationML Engine "AMLEngine2.1 Version 1.0.0" supporting CAEX2.15 and CAEX3.0 is now avai...

» show news

Save the date!

12.01.2018 - Johanna Pauly
5th AutomationML User Conference will take place from October 24th to 25th, 2018 at ABB Sweden.

» show news

New Member – SICK AG

10.01.2018 - Igor Klubkov
December 01st, 2017. Magdeburg. We are happy to welcome SICK AG as a new member of the AutomationML...

» show news

New Member – Hochschule Pforzheim

11.12.2017 - Igor Klubkov
September 09th, 2017. Magdeburg. We are happy to welcome Hochschule Pforzheim as a new member of th...

» show news

Participation at SPS IPC Drives 2017 in Nuremberg

07.11.2017 - Johanna Pauly
From November 28th to 30th, 2017 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...

» show news

Best Paper Award

19.10.2017 - Johanna Pauly
We are happy to announce that a paper emerged from AutomationML research activities has won this yea...

» show news

AutomationML users came together for the fourth AutomationML PlugFest

19.10.2017 - Johanna Pauly
From 11th to 12th of October, 2017 fifty users and developers of engineering tools for factory plann...

» show news

PlugFest 2017: Last Minute Registration

27.09.2017 - Johanna Pauly
As there are few free places, you can still registrate for the 4th AutomationML PlugFest (October 11...

» show news

Example file of a RobotCell

22.09.2017 - Tina Petzold
The file of a model of a RobotCell in AML (with COLLADA and PLCopen XML) is now available in our dow...

» show news

BPR "AutomationML Container" available

19.09.2017 - Nicole Schmidt
AutomationML e.V. is going to publish ‘Best Practice Recommendations’ to complement the AutomationML...

» show news

Don"t forget your Plugfest registration

11.09.2017 - Nicole Schmidt
Don"t forget your registration for the 4th AutomationML PlugFest (October 11/12, 2017 in Berlin/Germ...

» show news

New Member – FZI Research Center for Information Technology

08.08.2017 - Igor Klubkov
July 10th, 2017. Magdeburg. We are happy to welcome FZI Research Center for Information Technology ...

» show news