news


Participation at SPS IPC Drives 2017 in Nuremberg

From November 28th to 30th, 2017 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You can find us in hall 6 at booth of logi.cals (6-230).

We would be pleased to give you information about the implementation of an Industrie 4.0 component using OPC UA, or in general about the data exchange format AutomationML.

We look forward to welcoming you to our booth!

(07.11.2017 - Johanna Pauly)

Application Recommendation "Drive Configurations (M-CAD aspects)" is available

11.05.2020 - AutomationML office
This application recommendation proposes a modelling method for mechanical aspects of drive configur...

» show news

Application Recommendation Extension "Drive for Automation Project Configuration" is available

09.04.2020 - AutomationML office
This application recommendation proposes a modelling method of drive configurations based on automat...

» show news

Application Recommendation "Automation Project Configuration" is available

09.04.2020 - AutomationML office
This application recommendation proposes a modelling method of automation project configuration data...

» show news

AutomationML Editor v.5.3.3. (64 bit) is available

10.02.2020 - AutomationML office
The AutomationML association releases the updated » show news

New direction of the AutomationML office

31.01.2020 - AutomationML office
AutomationML e.V. is pleased to announce that Mr. Sven Schwirblat has joint the AutomationML office....

» show news

5th AutomationMl PlugFest - Presentations available now!

23.01.2020 - Aslihan Akyol
The presentations from the 5th AutomationML PlugFest are finally online!

» show news

New Member - Rockwell Automation

07.01.2020 - Aslihan Akyol
We are happy to welcome Rockwell Automation as a new member of the AutomationML association.

» show news

SPS 2019

25.11.2019 - Aslihan Akyol
It"s time! From tomorrow on you will see us at the SPS fair in Nuremberg! We are excited to welcom...

» show news

Asset Administration Shell Representation

25.11.2019 - Aslihan Akyol
In cooperation with Platform Industrie 4.0 and AutomationML e.V., a presentation using AutomationML ...

» show news

5th AutomationML PlugFest

06.09.2019 - AutomationML e.V.
There are still places available, so if interested, sign up for the following link: » show news

5th AutomationML PlugFest – Keynote announcement

30.08.2019 - Arndt Lüder
The keynote to be given at the 5th AutomationML PlugFest has been fixed. Dr. Christian Mosch from VD...

» show news

5th AutomationML PlugFest - New Program Available

12.08.2019 - Johanna Pauly
Download the PlugFest program » show news

New Member – Capgemini

29.07.2019 - Igor Klubkov
We are happy to welcome Capgemini as a new member of the AutomationML association.

» show news

5th AutomationML PlugFest - Registration possible now

08.07.2019 - Johanna Pauly
A registration for the 5th AutomationML PlugFest is possible now. The 5th AutomationML PlugFest is i...

» show news

New Member – ITRI

21.05.2019 - Johanna Pauly
May 2019. Magdeburg. We are happy to welcome ITRI as a new member of the AutomationML association.

» show news

5th AutomationML PlugFest - Extended Submission Deadline

20.05.2019 - Johanna Pauly
The submission deadline for the 5th AutomationML PlugFest extended until June 3, 2019. The PlugFest ...

» show news

New Member – Johannes Kepler University Linz

29.04.2019 - Igor Klubkov
May 1st, 2019. Magdeburg. We are happy to welcome Johannes Kepler University Linz as a new member o...

» show news

5th AuotmationML PlugFest - Call for Speaker

26.04.2019 - Johanna Pauly
We are looking forward to welcoming you at the Helmut Schmidt University in Hamburg, Germany, for th...

» show news

Participation at Hanover Fair

22.03.2019 - Johanna Pauly
From April 1st to 5th, 2019 AutomationML e.V. will attend the HMI in Hanover. You can find us in hal...

» show news

New Member – Coman-Software GmbH

25.02.2019 - Igor Klubkov
February 1st, 2019. Magdeburg. We are happy to welcome Coman-Software GmbH as a new member of the A...

» show news

New Member – TH Nürnberg

21.12.2018 - Igor Klubkov
September 1st, 2018. Magdeburg. We are happy to welcome TH Nürnberg as a new member of the Automati...

» show news

AutomationML in a Nutshell

13.12.2018 - Johanna Pauly
The new AutomationML Brochure is now available online! Click » show news

80 Participants from 14 countries at the 5th AutomationML User Conference

20.11.2018 - Johanna Pauly
AutomationML e.V., together with ABB, hosted the 5th AutomationML User Conference on October ...

» show news

Participation at SPS IPC Drives in Nuremberg

19.11.2018 - Johanna Pauly
From November 27th to 29th, 2018 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...

» show news

The AutomationML Editor 5.1.2 is available

01.11.2018 - Johanna Pauly
The AutomationML association releases the updated » show news

BPR "Units in AutomationML" available

18.10.2018 - Johanna Pauly
AutomationML e.V. publishes ‘Best Practice Recommendations’ to complement the AutomationML standard ...

» show news

New Member – SBA Research

15.10.2018 - Igor Klubkov
Oktober 1st, 2018. Magdeburg. We are happy to welcome SBA Research as a new member of the Automatio...

» show news

5th AutomationML User Conference - Last Minute Registration

26.09.2018 - Johanna Pauly
As there are few free places, you can still register for the 5th AutomationML User Conference (Octob...

» show news

New Member – Schneider Electric

17.09.2018 - Igor Klubkov
September 15th, 2018. Magdeburg. We are happy to welcome Schneider Electric as a new member of the ...

» show news

Don"t forget your Conference registration!

10.09.2018 - Johanna Pauly
The AutomationML association invites you to attend the 5th AutomationML User Conference on October 2...

» show news