wikinews
Participation at Hanover Fair
We would be pleased to give you information about the use of AutomationML within your engineering chain, the implementation of an Industrie 4.0 component using OPC UA, or in general about the data exchange format AutomationML.
Visit us!
(22.03.2019 - Johanna Pauly)
New Member – Coman-Software GmbH
25.02.2019 - Igor Klubkov
February 1st, 2019. Magdeburg. We are happy to welcome Coman-Software GmbH as a new member of the A...
February 1st, 2019. Magdeburg. We are happy to welcome Coman-Software GmbH as a new member of the A...
New Member – TH Nürnberg
21.12.2018 - Igor Klubkov
September 1st, 2018. Magdeburg. We are happy to welcome TH Nürnberg as a new member of the Automati...
September 1st, 2018. Magdeburg. We are happy to welcome TH Nürnberg as a new member of the Automati...
AutomationML in a Nutshell
80 Participants from 14 countries at the 5th AutomationML User Conference
20.11.2018 - Johanna Pauly
AutomationML e.V., together with ABB, hosted the 5th AutomationML User Conference on October ...
AutomationML e.V., together with ABB, hosted the 5th AutomationML User Conference on October ...
Participation at SPS IPC Drives in Nuremberg
19.11.2018 - Johanna Pauly
From November 27th to 29th, 2018 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...
From November 27th to 29th, 2018 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...
The AutomationML Editor 5.1.2 is available
BPR "Units in AutomationML" available
18.10.2018 - Johanna Pauly
AutomationML e.V. publishes ‘Best Practice Recommendations’ to complement the AutomationML standard ...
AutomationML e.V. publishes ‘Best Practice Recommendations’ to complement the AutomationML standard ...
New Member – SBA Research
15.10.2018 - Igor Klubkov
Oktober 1st, 2018. Magdeburg. We are happy to welcome SBA Research as a new member of the Automatio...
Oktober 1st, 2018. Magdeburg. We are happy to welcome SBA Research as a new member of the Automatio...
5th AutomationML User Conference - Last Minute Registration
26.09.2018 - Johanna Pauly
As there are few free places, you can still register for the 5th AutomationML User Conference (Octob...
As there are few free places, you can still register for the 5th AutomationML User Conference (Octob...
New Member – Schneider Electric
17.09.2018 - Igor Klubkov
September 15th, 2018. Magdeburg. We are happy to welcome Schneider Electric as a new member of the ...
September 15th, 2018. Magdeburg. We are happy to welcome Schneider Electric as a new member of the ...
Don"t forget your Conference registration!
10.09.2018 - Johanna Pauly
The AutomationML association invites you to attend the 5th AutomationML User Conference on October 2...
The AutomationML association invites you to attend the 5th AutomationML User Conference on October 2...
New Member – AmpereSoft GmbH
22.08.2018 - Igor Klubkov
September 01st, 2018. Magdeburg. We are happy to welcome AmpereSoft GmbH as a new member of the Aut...
September 01st, 2018. Magdeburg. We are happy to welcome AmpereSoft GmbH as a new member of the Aut...
Program for the 5th AutomationML User Conference
07.08.2018 - Johanna Pauly
The program for the 5th AutomationML User Conference at the ABB Business Center in Gothenburg, Swede...
The program for the 5th AutomationML User Conference at the ABB Business Center in Gothenburg, Swede...
Application Recommendation "Provisioning for MES and ERP – Support for IEC 62264 and B2MML" available
06.07.2018 - Johanna Pauly
This application recommendation describes the integration of ISA-95 and/or B2MML into AutomationML.
This application recommendation describes the integration of ISA-95 and/or B2MML into AutomationML.
AutomationML Part 1 Edition 2 at "FOCUS online"
08.06.2018 - Johanna Pauly
The German magazine "FOCUS online" reports about AutomationML, the release of the AutomationML stand...
The German magazine "FOCUS online" reports about AutomationML, the release of the AutomationML stand...
AutomationML Standard Part 1 Edition 2 has been published
28.05.2018 - Johanna Pauly
The AutomationML IEC standard document IEC62714-1:2018 ED2 has been published. The first part of the...
The AutomationML IEC standard document IEC62714-1:2018 ED2 has been published. The first part of the...
5th AutomationML User Conference - Call for Speakers Extended
20.04.2018 - Johanna Pauly
The deadline for paper submissions for the 5th AutomationML User Conference is extended until 13th o...
The deadline for paper submissions for the 5th AutomationML User Conference is extended until 13th o...
Participation at Hannover Messe
04.04.2018 - Johanna Pauly
From April 23th to 27th, 2018 AutomationML e.V. will attend the HMI in Hanover. You can find us in h...
From April 23th to 27th, 2018 AutomationML e.V. will attend the HMI in Hanover. You can find us in h...
5th AutomationML User Conference - Registration possible now
28.03.2018 - Johanna Pauly
A registration for the 5th AutomationML User Conference is possible now. The event is held in Eng...
A registration for the 5th AutomationML User Conference is possible now. The event is held in Eng...
5th AutomationML User Conference - Call for Speakers
16.02.2018 - Johanna Pauly
We are looking forward to welcoming you at the ABB Business Center in Gothenburg, Sweden, for the 5t...
We are looking forward to welcoming you at the ABB Business Center in Gothenburg, Sweden, for the 5t...
New Engine Online
15.01.2018 - Johanna Pauly
The new AutomationML Engine "AMLEngine2.1 Version 1.0.0" supporting CAEX2.15 and CAEX3.0 is now avai...
The new AutomationML Engine "AMLEngine2.1 Version 1.0.0" supporting CAEX2.15 and CAEX3.0 is now avai...
Save the date!
12.01.2018 - Johanna Pauly
5th AutomationML User Conference will take place from October 24th to 25th, 2018 at ABB Sweden.
5th AutomationML User Conference will take place from October 24th to 25th, 2018 at ABB Sweden.
New Member – SICK AG
10.01.2018 - Igor Klubkov
December 01st, 2017. Magdeburg. We are happy to welcome SICK AG as a new member of the AutomationML...
December 01st, 2017. Magdeburg. We are happy to welcome SICK AG as a new member of the AutomationML...
New Member – Hochschule Pforzheim
11.12.2017 - Igor Klubkov
September 09th, 2017. Magdeburg. We are happy to welcome Hochschule Pforzheim as a new member of th...
September 09th, 2017. Magdeburg. We are happy to welcome Hochschule Pforzheim as a new member of th...
Participation at SPS IPC Drives 2017 in Nuremberg
07.11.2017 - Johanna Pauly
From November 28th to 30th, 2017 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...
From November 28th to 30th, 2017 AutomationML e.V. will attend the SPS IPC Drives in Nuremberg. You ...
BPR "Reference Designation" available
06.11.2017 - Johanna Pauly
AutomationML e.V. is going to publish ‘Best Practice Recommendations’ to complement the AutomationML...
AutomationML e.V. is going to publish ‘Best Practice Recommendations’ to complement the AutomationML...
Best Paper Award
19.10.2017 - Johanna Pauly
We are happy to announce that a paper emerged from AutomationML research activities has won this yea...
We are happy to announce that a paper emerged from AutomationML research activities has won this yea...
AutomationML users came together for the fourth AutomationML PlugFest
19.10.2017 - Johanna Pauly
From 11th to 12th of October, 2017 fifty users and developers of engineering tools for factory plann...
From 11th to 12th of October, 2017 fifty users and developers of engineering tools for factory plann...
PlugFest 2017: Last Minute Registration
27.09.2017 - Johanna Pauly
As there are few free places, you can still registrate for the 4th AutomationML PlugFest (October 11...
As there are few free places, you can still registrate for the 4th AutomationML PlugFest (October 11...